Hi, I'm Alex, the owner of GALAXSAW Handyman Services. After working as a commercial carpenter on large-scale construction projects—including a new Nike facility in Beaverton—I discovered that I enjoy the personal side of construction: helping homeowners, landlords, and local businesses with smaller projects that need attention and quality workmanship.
Today, I provide reliable handyman services throughout the Portland metro area. I specialize in small residential and commercial projects that many larger contractors don't take on, including repairs and installations that can typically be completed in four hours or less. My experience includes electrical and plumbing fixture replacements, PEX-A and PEX-B plumbing work, door lock and hardware installation, door jamb repairs, and many other home maintenance and repair services.
I am proud to be part of the Home Depot Pro Services contractor network and have completed projects for local organizations, including Reynolds School District. I am licensed, bonded, and insured through the Oregon Construction Contractors Board (CCB #233510).
Whether you are a homeowner, landlord, or property manager, my goal is simple: provide dependable service, clear communication, and quality repairs you can trust.
Thank you for visiting GALAXSAW Handyman Services. I look forward to helping with your next project.
Dryer Vent Inspection, Cleaning & Installation in Portland Metro Oregon
Is your dryer taking longer than it used to to dry clothes? Is the laundry room getting unusually hot, or are you noticing weak airflow from the outside dryer vent?
GALAXSAW provides dryer vent inspection, cleaning, and installation services for homeowners, landlords, and small residential properties throughout the Portland metro area.
A dryer vent is easy to overlook because most of the vent system is hidden behind walls, ceilings, floors, or appliances. When lint buildup, a damaged vent, poor routing, or an installation problem restricts airflow, your dryer may have to work harder and run longer than necessary.
If you need a dryer vent checked, cleaned, replaced, or properly installed, contact GALAXSAW to discuss your project.
Dryer Vent Inspection
A dryer can appear to be working normally while the vent system has an airflow problem.
A dryer vent inspection can help identify conditions such as:
- Restricted or weak airflow
- Lint buildup inside the vent
- Damaged or disconnected vent sections
- Problems with the vent connection behind the dryer
- Improper or inefficient vent routing
- Problems with the exterior dryer vent opening
- A vent that needs cleaning, repair, replacement, or installation
If your dryer is taking two or more cycles to dry clothes, the dryer itself may not always be the problem. Restricted dryer vent airflow can be one possible cause.
GALAXSAW can inspect the accessible portions of the dryer vent system and help determine what type of work may be needed.
Dryer Vent Cleaning
Lint does not only collect in the dryer's lint screen. Lint and debris can also accumulate inside the exhaust vent leading from the dryer to the exterior of your home.
Signs that your dryer vent may need attention include:
- Clothes taking much longer to dry
- Clothes requiring multiple drying cycles
- Dryer or laundry room becoming unusually hot
- Weak airflow at the exterior vent
- Excessive lint around the dryer
- A burning or unusual smell while the dryer is operating
- Little or no air coming from the outside dryer vent
- You cannot remember the last time the vent was inspected or cleaned
Professional dryer vent cleaning is intended to restore unobstructed airflow through the vent system and remove accumulated lint and debris.
Cleaning the lint screen after every load is still important, but the lint screen does not replace cleaning and inspection of the exhaust vent itself.
Dryer Vent Installation
Installing a new dryer or remodeling your laundry area may require a new dryer vent installation or changes to an existing vent.
GALAXSAW can help with dryer vent installation projects where a properly routed exhaust connection is needed.
Depending on the home and project, installation may involve:
- Installing a new dryer exhaust vent
- Replacing an old or damaged vent
- Connecting a dryer to an existing exterior vent
- Replacing accessible vent sections
- Improving an existing vent route
- Installing or replacing the exterior vent termination
Every home is different. The location of the dryer, exterior wall, attic or crawl space, and existing construction can affect the best way to route the vent.
Dryer Vent Replacement
Sometimes cleaning is not the right solution.
An existing dryer vent may have damaged sections, an unsuitable configuration, or another problem that makes replacement a better option.
If an inspection shows that part or all of the accessible vent system needs to be replaced, GALAXSAW can evaluate the project and discuss the available options with you.
Why Is My Dryer Taking So Long to Dry?
One of the most common reasons homeowners start looking for dryer vent service is a simple question:
"Why is my dryer taking so long to dry clothes?"
If your dryer used to dry a normal load in one cycle and now requires two or three cycles, it is worth checking the airflow.
A restricted exhaust vent can prevent moist, warm air from leaving the dryer efficiently. Other appliance-related problems can also cause poor drying performance, so an inspection can help determine whether the vent system is contributing to the problem.
Why Is There Little Air Coming From My Dryer Vent Outside?
The exterior dryer vent should allow exhaust air to leave the home.
If you turn on the dryer and notice very weak airflow—or almost no airflow—there may be a restriction somewhere in the vent system.
Possible causes can include:
- Lint accumulation
- A blocked vent
- Damaged ductwork
- A disconnected section
- An exterior vent obstruction
- An inefficient vent configuration
Rather than guessing which part is causing the problem, having the accessible vent system inspected can help identify the next step.
Dryer Vent Service for Small Residential Projects
GALAXSAW specializes in smaller residential projects and installations.
That makes dryer vent work a natural fit when you need a specific project completed without hiring a large remodeling company for a relatively small job.
Whether you need an existing dryer vent inspected, cleaned, replaced, or a new vent installation evaluated, contact GALAXSAW and describe your project.
Serving Portland Metro and Nearby Communities
GALAXSAW provides residential handyman and installation services throughout the Portland metro area, including:
Gresham, Troutdale, Fairview, Wood Village, Portland, Beaverton, Clackamas, Happy Valley, Damascus, Boring, Corbett, Sandy, Oregon City, Gladstone, Milwaukie, Lake Oswego, Tigard, Tualatin, West Linn, and surrounding communities.
If you do not see your city listed, contact GALAXSAW. Your location may still be within our service area.
Frequently Asked Questions
How do I know if my dryer vent needs cleaning?
Long drying times, multiple drying cycles, excessive heat, weak airflow at the exterior vent, and unusual smells can all be reasons to have the dryer vent inspected.
How often should a dryer vent be cleaned?
There is no single schedule that fits every home. Dryer use, vent length, vent configuration, and other conditions can affect how frequently the system needs attention. If you notice reduced drying performance or another warning sign, an inspection can help determine whether cleaning is necessary.
Can a dryer vent be inspected without replacing it?
Yes. An inspection can help determine whether the existing vent appears serviceable or whether cleaning, repair, replacement, or installation work may be more appropriate.
Why does my dryer need two cycles to dry clothes?
Long drying times can have several causes. A restricted dryer exhaust vent is one possibility because poor airflow can prevent moisture from leaving the dryer efficiently. An inspection can help determine whether the vent is contributing to the problem.
Can you install a new dryer vent?
GALAXSAW provides dryer vent installation for appropriate residential projects. The exact installation method depends on the dryer location, existing construction, vent route, and exterior termination.
Can an old dryer vent be replaced?
Yes, depending on the existing construction and accessibility. If an existing vent is damaged or unsuitable, replacement may be a better option than simply cleaning it.
Do I need dryer vent cleaning or dryer vent installation?
That depends on the condition of your existing system. If the vent is serviceable but restricted, cleaning may be appropriate. If the vent is damaged, improperly configured, or missing, installation or replacement may be needed.
Need Your Dryer Vent Checked?
If your dryer is taking too long to dry clothes, the airflow seems weak, or you need a new dryer vent installed, GALAXSAW can evaluate your project.
Contact GALAXSAW to discuss your dryer vent inspection, cleaning, replacement, or installation project.
GALAXSAW LLC
Licensed • Insured • Bonded
Oregon CCB #233510
Serving Portland Metro and surrounding communities
Specialize in small, 4 hours or less interior projects, and exterior assemblies of any size.
Contact Us
